Skip links and keyboard navigation

Lahey's Canungra Sawmill Complex


Place Details
Place ID 700002
Registration Type Archaeological
Place Name Lahey's Canungra Sawmill Complex
Place Classification Archaeological
Place Category Manufacturing and Processing
Forestry and Timber Industry
Place Type Sawmill
Themes 6 Building settlements, towns, cities and dwellings / 6.1 Establishing settlements and towns
2 Exploiting, utilising and transforming the land / 2.7 Experimenting, developing technologies and innovation
2 Exploiting, utilising and transforming the land / 2.2 Exploiting natural resources
3 Developing secondary and tertiary industries / 3.2 Developing manufacturing capacities
Register Entry Date 06/03/2009

Location
Address 10-26 Finch Road
Town / Suburb CANUNGRA
Post Code 4275
LGA SCENIC RIM REGIONAL COUNCIL

Cultural Heritage Significance
Principal Period
of Significance
1884 - c.1935-9
Archaeological Lahey's Canungra Sawmill Site is important in demonstrating part of the pattern of Queensland's history as remnant evidence of an early, substantial and enduring timber processing operation between 1884 and 1921, and again from 1933 until c.1935. Lahey's Canungra Sawmill Site is important in demonstrating the pattern of settlement and land use in south-east Queensland. During its peak period of operation after 1913, the mill was the largest softwood mill in Queensland and the largest processor of softwood timber in Australia. Archaeological investigations of the Lahey's Canungra Sawmill Complex have potential to reveal important aspects of Queensland's history, including early and long enduring timber processing practices, influences on the development of Queensland by a prominent family in its history - the Lahey family, and the daily lives and conditions faced by workers in late 19th and early 20th century timber industry. The Lahey's Canungra Sawmill Complex provides an opportunity to examine, through its archaeological remains, an important early and long enduring timber processing operation. Although timber processing operations were widespread across Queensland by the late 19th century, archaeological investigations into the mill layout and composition have potential to yield additional information on the changing and often innovative workplace practices that occurred at the Canungra Sawmill. The archaeological remains at the Canungra Sawmill provide important comparative information on sawmilling practices, mill layouts and configurations for other sawmill sites found across Queensland. Archaeological investigations at Lahey's Canungra Sawmill Complex provide a rare opportunity to examine issues of continuity and change to milling operations in late 19th and early 20th century Queensland. The complex has historical associations with the influential Lahey family, who ran the milling operations at Canungra until 1921. Analysis of subsurface archaeological deposits may provide new information on previously unknown or little documented timber manufacturing processes, particularly as the Lahey family were well known for embracing change and for innovative workplace practices. Additional archaeological artefacts are anticipated to occur across the site, especially within the area of the main sawmill site and the concentration of building and machinery foundations adjacent to the former Lahey's siding. Analysis of archaeological features at the Canungra Sawmill site will develop our understanding of the Lahey timber operations throughout the Canungra area, and provide comparative and supporting information for other related timber heritage places across the state. Archaeological investigations of subsurface archaeological materials will help in our understanding of working conditions and daily life within the mill and possibly the life of the mill's first employees through potential relocation of artefacts and features associated with the first workers cottages for the mill. The mill complex has the potential to help us answer a range of archaeological research questions including, but not limited to, early timber-processing practices in Queensland, life at an early mill operation in Queensland, the material culture of the Lahey family and their impact on timber getting practices, processes and operations in Queensland.

History
History The Canungra Sawmill operated between 1884 and c.1935. The mill was wholly owned and operated by the Lahey family until 1921. Timber from throughout the Canungra region was brought to the mill from the company's timber stands via a private tramway (QHR 602529) and transported out of Canungra on the Government railway line. The mill was rebuilt after major fires in 1897 and 1906 and modernised with new milling equipment and updates to processing techniques were made regularly. The mill and all associated equipment, infrastructure and timber stands were finally sold by the Lahey's in 1921. The mill changed hands twice more (in 1923 and 1933) as the viability of the timber industry in the region waned, before closing for a final time c.1935. European settlement of the area surrounding the Coomera River commenced in 1843 with the establishment of the Tambourine holding. Early timber harvesting commenced in the 1860s by Hugh Mahony who cut and hauled cedar logs to mills in Ipswich. The Lahey family emigrated from their native Ireland to Australia in 1862. Francis Lahey, his wife and eleven children arrived in Sydney, but immediately travelled north to Brisbane. The family began farming in the Pimpama region in 1870. In 1875 Francis Lahey purchased a sugar mill at Tygum, near Waterford, for his sons. Francis expanded the operations at Tygum to include sawmilling, an industry that would dominate the working lives of the next generation of the Lahey family. After being informed of quality timber in the region, David Lahey commenced construction of a sawmill at Canungra on 2 October 1884 (Kerr 1998:226; Lahey 1996:1). During the same year David, John, Isaiah, Thomas and Evangeline Lahey all applied for and were granted selections of land around Canungra totalling over 3,000 acres. Lahey's Canungra Sawmill was established on Portion 61, Canungra on land leased from Robert Christie and beside what is now known as Christie Street (Lahey 2003:96). With the construction of the mill, David Lahey also had a number of small cottages built on site for mill workers while others were established in and around what would become the township of Canungra. Machinery for Lahey's Canungra Sawmill was brought up the Logan River by steamer to a location near Logan Village, and hauled to the sawmill site by bullock teams (Kerr 1998:226; Lahey 1996:6). Production at the mill steadily increased from 1885 onwards. Much of the timber produced was used for the construction of housing throughout southeast Queensland. The Lahey family was hard working, innovative, and often experimental, eager for change and mindful of market forces and demands. During the 1880s, the Lahey family expanded their business, establishing an office in Brisbane in 1887, additional saw and planing mills at Beaudesert in 1888, and another mill at Widgee near Hill View in 1898. The economic downturn of the 1890s forced the Lahey's into stave-shaping and casking to provide enough income to keep the business alive. Staves are narrow strips of wood placed edge to edge to form the sides, covering, or lining of a vessel or structure. On the night of 9 July 1897, the Canungra mill burnt down and 20,000 super feet of sawn and dressed pine in the mill yards was destroyed. The mill was re-built but at a larger scale and was more modern in layout than the original mill, with the planing machine and other machinery separated from the main milling activities (Kerr 1998:226). By the turn of the twentieth century, transportation of timber to Lahey's Canungra Sawmill was becoming a problem. By this time the Lahey's had acquired timber leases amounting to over 16,000 acres in the Canungra and Pine Creek Valleys, thereby requiring the slow and expensive bullock teams to haul logs over ever-increasing distances. The Lahey's viewed mechanisation as the solution to their transportation problems and it was decided a tramway be built into the Pine Creek Valley. A narrow gauge of 3 feet 6 inches was chosen for the tramway to match the gauge of the growing Queensland Government Railways, as it was hoped that the government line would eventually extend to Canungra (this finally occurred in 1914). Lahey's Canungra Sawmill was again badly damaged by fire in the early hours of 13 January 1906 (Kerr 1998:226). The main building which housed the sawing operations was completely destroyed. Up-to-date equipment recently imported from the United States of America was lost, including a broom handle machine, sand-papering machine and butter box printing machine. Several new additions to the mill operations, including a new drying kiln and planning machine shed were, however, saved. The fire forced the closure of the mill for three months. The rebuild following this fire was complemented by improvements between 1907 and 1908. Electric log-hauling machinery was installed. The tramway servicing the mill was extended over time and by 1910 the main line was 13½ km long with a branch 2 km up Flying Fox Creek and a sub-branch 500m up Little Flying Fox Creek to service a new aerial ropeway on Beech Mountain (Morgan 2000; QHR 602529). Eventually, the total length of track laid amounted to 26½ km. Usage of the tramway continued to increase so that during 1915 alone, 15,000 tons of logs were being hauled to the mill along the tramway (QHR 602529). In 1913, Tom Lahey left Australia on an inspection of milling operations in the United States of America. The Lahey's were interested in purchasing new milling machinery and keen to stay abreast of the latest trends in sawmilling practice. A range of new equipment was purchased, and once installed, the capacity of the mill doubled and the cost of labour greatly reduced. The introduction of an eight foot band mill and steam log turner made the Lahey's Canungra Sawmill the biggest softwood mill in Queensland. In its heyday, the mill was producing Australia's largest output of softwood timber. In the process, the township of Canungra was established because of the presence and success of the mill. By 1920 much of the timber had been removed from the Canungra area. The War Services Homes Commission, established at the end of World War One, purchased the milling operation from the Lahey family, taking possession of the site on 1 January 1921 (Kerr 1998:226). Timber processed at the mill was to be used in the construction of housing for returned World War One servicemen. The mill, however, closed three months later due to a change in policy by the Commission for their acquisitions of timber (Kerr 1998:226) and was put up for sale. In 1923, Brisbane Timbers Ltd (part of which was owned by the Lahey family) purchased the mill by tender (The Argus, Friday 23 November 1923). The sale included all plant equipment, 10,412 acres of freehold land of which 4,393 acres carried pine, the timber tramway and branch lines totalling 16 miles of track, the locomotives and all rolling stock (The Argus, Wednesday 25 July 1923). In 1933, the Standply Timber Company purchased the mill and added an advanced veneer and plywood plant. The timber industry in the Canungra area had largely collapsed, however, by c.1935. That same year the last of the tramway rails and equipment was sold to a milling venture in Cardwell, north Queensland and the mill was dismantled. References The main source of historical information was Shirley Lahey (2003) The Lahey's: Pioneer Settlers and Sawmillers, Taringa, Queensland: Shirley Lahey, unless referenced otherwise. Kerr, John (1998) Forest industry heritage places study: sawmills and tramways South Eastern Queensland, Unpublished report to the Queensland Department of Environment. Lahey, Shirley (1996) David Lahey 1858-1942: His background and his life, Taringa, Queensland: Shirley Lahey. Morgan, R.K. (2000) Laheys' Canungra Tramway, Melbourne: Light Railway Research Society of Australia. QHR 602529 Lahey's Canungra Tramway Tunnel, entry in the Queensland Heritage Register The Argus, Wednesday 25 July 1923 The Argus, Friday 23 November 1923

Description
Description The archaeological remains of Lahey's Canungra Sawmill Complex are located within the western half of Lot 2 on RP200758, located north of Christie Road and west of Finch Road, in the township of Canungra. The land on which the site is situated has been cleared and is an undeveloped paddock. Evidence of recent use includes worn down walking and bicycle tracks as well as modern rubbish. An abandoned caravan park occupies the eastern portion of Lot 2 on RP200758. There are also a number of temporary enclosures, presumably for horses, consisting of wire and star-picket fences. The abandoned caravan park and remaining wire and star-picket fence lines are not considered to be of cultural heritage significance. The main sawmill remains are concentrated in the centre of the western portion of the lot. Numerous concrete machinery foundations are present across this area, including the supporting pillars for the mills steam engine and concrete steam water pits. A 7m x 7m concrete slab located in this area may also be the base for the crane used to lift logs from the trams bringing logs to the mill. The terminal end of the old tramway line is evident in the form of the cut ends of the rails embedded in a large concrete foundation. A number of broken bricks were recorded on the surface, including those from Campbell¿s Brickworks, Brisbane or Redbank, as well as other elliptical frogged but unlettered types possibly used as insulation for the two boilers known to have been on site. There are a limited number of metal artefacts visible, including the remains of a metal storage bin. Potential exists for substantial and extensive subsurface archaeological deposits in the vicinity of these surface remains as it was noted that the area shows limited subsurface disturbance, except for two easements which dissect the site. A services pipe (Easement A on RP150196) is exposed in the south-west of the lot adjoining the bowls club, and runs underground diagonally across the lot to the north-east towards Canungra Creek. A second easement (Easement B on RP181573) also runs from the south-west corner of the lot to its northern boundary with Canungra Creek. A second concentration of concrete machinery and building foundations is located in the northern section of Lot 2 on RP200758. These remains straddle a wide intermittent creek which runs from the south-west corner of Lot 2 on RP200758 and terminates on the northern boundary of the lot, and Easement B on RP181573. These foundations are located immediately adjacent to the remains of the former Lahey's railway siding and are interpreted as part of the infrastructure used to load timber onto trains heading from the mill on the government Canungra-Logan Village branch line and also possibly related to the later Standply Timber Company veneer and plywood operations. There are potentially substantial subsurface archaeological deposits located in the vicinity of these surface remains as the area shows little evidence of recent subsurface disturbance though it may have been affected by works associated with the construction of Easement B on RP181573.

Element
Element Name Sawmill Complex
Design Period 1870s - 1890s Late 19th century
Construction Period 1884
Place Components Brick scatter/deposit
Metal scatter/deposit
Building foundations/ruins

Keywords
Keywords Industrial heritage

Images and Maps
Images
Maps Create a Web Map



Information about places in the Queensland Heritage Register is maintained by the Department of Environment and Heritage Protection (EHP) under the Queensland Heritage Act 1992. Information available here is only part of the full Register entry and should not be taken as an official entry. Absence does not mean a particular place is not in the Register.

Certified copies of the full entries in the Register are available for a fee.

You can also search the full Register for a fee to find out if a place or parcel of land is listed or otherwise affected by the Act.

Last updated: 15 March 2013

Heritage Search Options